bloodIt is least difficult to remove blood when it’s still wet. Dried blood stains are infamously more difficult to remove. Also, make certain throughout the process to blot the stain, not rub it, as this is only going to push the stain further into the carpet fibers. Take advantage of the following steps along with the suitable cleaning solution for your carpet type.

Things Needed to Clean Blood:

  • Clean white towels
  • Cleaning solution
  • Oriental: 1 part white vinegar with 2 parts cold water
  • Rinsing Solution: 2-6 drops mild, non-alkali dish detergent with 1 cup cold water
  • Spray bottle (for cleaning solution)
  • Synthetics: 2 tbsps household ammonia with 1 cup cold water
  • Water bottle
  • Wool: 1 tsp mild, non-alkali detergent with 1 cup cold water


  1. Start off by blotting using a clean cloth to remove as much of the blood as possible. It’s essential to BLOT throughout this whole procedure DO NOT SCRUB. Your main aim is to “lift” the stain, not rub it into the fibers. Working externally of the stain towards the center help keep the stain from spreading.
  2. Spray stain with cold water.
  3. Blot to eliminate as much of the stain as possible.
  4. Spray a modest amount of cleaning solution on the stain.
  5. Blot using a clean dry cloth until no more stain shows on the cloth. You simply must change your cloth often or use a clean patch of the towel each and every time as you are blotting to be sure you aren’t spreading the stain.
  6. Perform again steps 4 and 5 until the stain has stopped being visible.
  7. Spray with a rinsing solution.
  8. Blot using a clean cloth to remove.
  9. Spray with water that is clean.
  10. Blot with a clean cloth. Do it again as needed to be sure all the cleaning solution has been removed.
  11. Cover stain using clean cloth or stack of paper towels and place a heavy weight on top (heavy books, etc.)
  12. Allow for it to set for several hours to soak up any remaining liquid.
  13. Take away weights and cloths and allow for the area to air dry.
  14. As soon as the spot has dried completely, vacuum thoroughly to recover carpet texture and pick up any remaining cleaning solution residue.
  15. In case the spot becomes brown when it dries out, mix 1 part vinegar with 2 parts water. Use the solution on the dried spot and then blot to dry. This may be repeated ONCE.


  • The following common things for the home enable you to remove blood stains as well: baking soda, meat tenderizer, salt, or hydrogen peroxide together with cold water.
  • Regarding baking soda and meat tenderizer, come up with a paste using cold water and apply to the stain.
  • Pour salt on the stain and blot using a towel dampened with peroxide solution (2 parts water to 3 parts hydrogen peroxide). Wash out by blotting using a clean, damp towel.
  • Prevent using warm water, it accelerates the setting process and makes the blood stain harder to remove.
  • Never use laundry detergent or dishwasher detergents simply because they may damage the fibers of your carpet.
  • Never use bleach or ammonia on wool carpets mainly because it will damage the fibers.
  • Use the base of a spoon to gently work cleaning solutions into the carpet with no damage to the fibers.
  • In the event that hardly anything else works, try spitting on it. It may work, particularly when it’s your own blood.
  • Never use carpet spot cleaners on oriental rugs since it will damage the fibers.
  • Oriental rugs need to be cleaned with caution. In case your rug is an antique, silk, or part silk, seek the help of a professional to remove the stain.

Carpet Cleaning Auckland 09-489 5599